# Is Cartwheel Control SOTA?

Pending benchmarks. Announced Nov 10, 2026; no independent results yet.

As of Nov 22, 2026, Cartwheel Control is pending benchmarks on isitsota: announced Nov 10, 2026, with no independent results on the boards we track yet.

Cartwheel's whole-body motion-tracking policies for humanoid robots in physics simulation, announced November 10, 2026. Official pages release policies for the Unitree G1 (29 joints), Menlo Research Asimov-1 (25 joints), and RoboParty RP1 (28 joints). Given recent joint and IMU readings and the next 10 frames of a reference motion, a policy outputs joint-position targets at 50 Hz. Ungated weights are on Hugging Face under the Cartwheel Open Model License; simulation and visualization code on GitHub is Apache-2.0. Official pages say the policies have not been deployed on hardware.

Canonical: https://isitsota.com/m/cartwheel-control
Last updated: 2026-11-12
Tracking since: 2026-11-12

## Announced facts

| Fact | Value |
| --- | --- |
| Lab | Cartwheel |
| Announced | Nov 10, 2026 |
| API | Not yet |
| Open weights | Published · Public, ungated Hugging Face repo GetCartwheelInc/cartwheel-control (andrew-cartwheel/cartwheel-control redirects there). Official pages say these are simulation releases and have not been deployed onto physical hardware (Cartwheel blog and model card) |
| Type | Whole-body motion-tracking policies for humanoid robots in physics simulation. Official pages describe a hardware-agnostic training approach from large-scale kinematic motion, with released policies for three robots (Cartwheel blog, GitHub README, and model card) |
| Robots | Official pages: Unitree G1 (29 joints), Menlo Research Asimov-1 (25 joints), and RoboParty RP1 (28 joints). Each folder includes policy.safetensors, config.json, the robot model, and example motions (Cartwheel blog, GitHub README, and model card) |
| Inference | Official model card: given the robot's recent joint and IMU readings and the next 10 frames of a reference motion, a policy outputs joint position targets at 50 Hz. The cartwheel-play command downloads weights, robot models, and example motions and runs them in simulation (GitHub README and model card) |
| Code | https://github.com/Cartwhl/cartwheel-control, Apache-2.0 (GitHub LICENSE and README) |
| License | Cartwheel Open Model License for the policy weights and configuration. The license says models are commercially usable and allows derivative models, with attribution and a termination clause if you sue over the model. Robot models bundled with each policy keep their own licenses: Asimov-1 CERN-OHL-S-2.0, Unitree G1 BSD-3-Clause, and RP1 with no upstream license stated (LICENSE, NOTICE, and model card) |

Tags marked unsure are not stated on the lab's own pages.

## What would let us call it

Verdicts use only independent boards we already track. Two consecutive snapshots are required before any crown.

- [x] Publicly announced with a source
- [x] Usable by the public (API or weights)
- [ ] Listed on an independent board we track
- [ ] Enough results for a rank in a category
- [ ] Holds across two snapshots (crowns only)

## What the lab claims

Self-reported. Shown for context; not used in any verdict.

- Lab claim: self-reported as tracking dynamic motion to within 15-20 mm on the three released robots, in physics simulation only. Official pages say the policies have not been deployed onto physical hardware (Cartwheel blog).

## Sources

- LAB: [Introducing Cartwheel Control (Cartwheel blog)](https://getcartwheel.com/blog/cartwheel-control) (2026-11-10)
- REPO: [GetCartwheelInc/cartwheel-control on Hugging Face](https://huggingface.co/GetCartwheelInc/cartwheel-control)
- REPO: [Cartwheel Open Model License](https://huggingface.co/GetCartwheelInc/cartwheel-control/blob/main/LICENSE)
- REPO: [Cartwhl/cartwheel-control on GitHub](https://github.com/Cartwhl/cartwheel-control)
- LAB: [Andrew Carr on X: Cartwheel Control](https://x.com/andrew_n_carr/status/2120302456009843087) (2026-11-10)

Tracking continues until an independent board lists it.

## Related

- Lab: [Cartwheel](https://isitsota.com/labs/cartwheel.md)
- All pending releases: https://isitsota.com/releases.md
- JSON: https://api.isitsota.com/v1/models/cartwheel-control
